Materials, made for living.

Vacuum your upholstery occasionally, using upholstery and crevice attachments to clean up dirt particles. Spot-clean using water-free cleaning solvents only. Do not use water or dry clean. Avoid over-rubbing with a hard-bristle brush as this could damage fibers. Before spot-cleaning, blot up any excess liquid with an undyed cloth. To clean minor stains, mix one cup of water with 1/4 teaspoon of clear detergent. Spray spots and blot with clean, undyed cloth until clean. Rinse thoroughly with clean water to remove any cleaning solution and allow it to air-dry.

Sintered stone tops may display natural mineral deposits, joint lines, veining, or other features that definitely add the luxury detail to your furniture without affecting its quality/performance. Clean the surface regularly with a granite cleaner daily, polish weekly. Avoid ammonia-based cleaners, scouring creams, abrasive cleansers or acid based products, which can break down the sealant and possibly damage or discolor the stone. Metallic sponges and abrasive cleaners are not suitable, as they can cause differences in the product's luster after cleaning. To prevent moisture damage like coffee rings, wipe up spills immediately with a soft, dry, undyed cloth. Protect the surface from incidental marks (like scratching) by using coasters, felt pads, and non-plastic mats. For extra protection, use limestone cleaning gel to preserve the sintered stone to renew the protection that is chipped away by the previous cleaning.

Always keep the leather surface dry. Avoid direct sweat contact. Dust regularly uses a soft duster or a dry, non-abrasive cloth, or vacuum cleaner. For water soluble stains and grease stains, remove the stains immediately from the surface with absorbent cloth or paper towel. Clean stains in a circular movement, working from the outside towards the center gently. Tap it gently, avoid excessive force and dry immediately. Never use a leather cleaning solution for Aniline Leather as it can cause leather's protective finish to wear off. Use of water and/or other solutions is not recommended and should not be part of your regular cleaning routine. Never use the following products or products containing these ingredients on leather. They may result in leather peeling, cracking and discoloration: Soap, toothpaste, perfume, nail polish, makeup remover, various ointments, lotion or liquid products not meant for leather. Any kinds of chemical, oil, detergent, bleach and other cleaning products; petroleum, alcohol, menthol, camphor, liquid paraffin, butanone, acid, alkali, ethers, ketones, benzene, and other similar substances. They will only dry out the leather and scratch off the protective finish. Place the sofa at least 50 cm from any heat source such as hair dryer, heaters. Do not expose your sofa to direct sunlight or strong light sources to preserve the color of the covering. Be careful with highly pigmented clothing (e.g. dark denim). Avoid contact with sharp objects. Scratches from buckles, zippers, keys, or toys can easily mar the leather surface. For extra protection, use Leather Protection Cream to condition the leather every 3 – 6 months. Proper care for Aniline Plus leather requires professional-grade leather care products. Always ensure the products used are suitable for this delicate finish.

Regular care keeps the brass finish at its best. Cover or store indoors when not in use and the temperature extremely rise or drop low. Upon the spills, please immediately wipe off with dry, soft cloth. Avoid using abrasive cleaning agents and scratching with sharp objects. Aggressive cleaning should not be necessary. For dirt and debris, clean the metal components using an all-purpose cleaner, spray with a sponge or a soft cloth until all the dirt is gone. The last step should be to dry with a soft towel. Pat the damp area gently as it dries off.

Although it is made to withstand the rigorous outdoor environment, regular care and maintenance will benefit the furniture. Cover or store indoors when not in use and the temperature extremely rise or drop low. Upon the spills, please immediately wipe off with dry, soft cloth. For dirt and debris, clean the aluminum components using an all-purpose cleaner, spray with a sponge or a soft cloth until all the dirt is gone. The last step should be to dry with a soft towel. Pat the damp area gently as it dries off. Dry thoroughly to prevent water spots. For coastal areas, rinse with fresh water to remove salt deposits. Avoid using abrasive cleaning agents and scratching with sharp objects. Aggressive cleaning should not be necessary.

For daily maintenance, clean the wood surface using a mild cleanser and soft undyed cloth as needed. Wipe up spills immediately to prevent moisture damage. Do not clean using abrasives, harsh, corrosive chemicals containing ammonia or silicone as these could damage surfaces and finishes. If needed, use a soft bristle brush and warm soapy water to remove stubborn dirt or stains. Once finished, be sure to rinse off any remaining soap residue with clean water and dry thoroughly with a soft cloth. Protect surfaces from incidental marks (like water marks, scorching, or scratching) by using coasters, felt pads, and non-plastic mats. We do not recommend that the items are in contact with water for a long time. Avoid placing suar furniture next to an air vent or air conditioning system. And, of course, keep suar furniture away from anywhere damp. Try to avoid placing suar wood furniture in direct sunlight as prolonged exposure can cause fading over time. If needed, apply a protective finish like wax or oil to protect against fading and discoloration due to UV rays and humidity. To do so, first sand the surface of the wood lightly before applying an even coat of wax or oil with a lint-free cloth. Allow it to soak in overnight before buffing with another soft cloth. Reapply once per year for optimal protection.

Polypropylene rope is designed for durability and easy care, making it perfect for busy households, outdoor use, and high-traffic furniture. Here’s how to keep it looking like new: Use a soft brush, microfiber cloth, or handheld vacuum to remove loose dirt Wipe immediately with a damp cloth and mild soap no harsh chemicals needed For stubborn grime, gently scrub with a soft-bristle brush + soapy water, then rinse and air dry PP yarn won’t absorb water, but shaking off excess moisture helps prevent mildew buildup Cover when not in use, keep in a dry, covered area to prolong lifespan using a breathable fabric cover