Materials, Made for Living
Explore textures and finishes. See them on our furniture, then choose a sample.



Indoor Teakwood
4 finishes. Every one held as a physical sample at the flagship.
Solid teak is the wood the collection is built on. Dense, straight-grained and rich in natural oils, it resists moisture, insects and the wear of daily life, and its colour deepens slowly as it ages. Our teak comes from mature logs, kiln dried to below 12% moisture before it is worked, so it stays stable in a tropical home. It carries SVLK legality verification (V-Legal), with FSC-certified teak where a specification calls for it. Cared for simply, solid teak lasts for generations.
Mocha Brushed Teak
HT05
Solid teak in a deep mocha: a cool brown with hints of charcoal and espresso as the light changes. The brushed surface raises the grain slightly, so it feels soft and matte under the hand. An occasional coat of teak sealant keeps the colour and protects the finish.
- Wood process
- Kiln dried
- Teak
- Mature teak
- Legality
- SVLK verified (V-Legal); FSC where specified
- Moisture content
- Below 12% before making
Care
Teak's finish may change over time, and solid wood can show small splits, knots and joint lines: they add character and never affect quality or performance. Dust weekly with a dry cloth. Use coasters under glasses and cups to prevent marks. Wipe up spills straight away with mild soap, water and a soft, undyed cloth, then dry the surface at once. Never use abrasive cleaners or sharp objects; gentle care is all teak needs. Keep indoor pieces out of direct sunlight and away from heat and moisture, which can crack the wood or change the finish. Seal the wood regularly to keep its natural colour: clean and treat teak surfaces at least once a year, more often in a harsh climate or an exposed position.


Living Fabric
16 finishes. Every one held as a physical sample at the flagship.
Our upholstery fabrics are woven for everyday living: soft to sit on, washable, and made to keep their colour, with cushion covers that open and come off for washing. Hyora is a yarn-dyed weave of polyester, viscose and linen that resists stains and fading; bouclé brings a looped, tactile surface; Nimora blends cotton, linen, acrylic and polyester for a soft, breathable feel. Each fabric's composition and care are stated with it.
Hyora Pebble
PF_H03
Hyora in pebble: a yarn-dyed performance weave of polyester, viscose and linen, soft to the touch and made to resist stains and fading. A cool blue grey, calm and easy to live with.
- Dyeing
- Yarn dyed
- Composition
- 83% polyester, 14% viscose, 3% linen
- Cleaning
- Washable; cushion covers come off for washing
Care
Vacuum occasionally with upholstery and crevice attachments to lift dust and grit. Blot spills straight away with a clean, undyed cloth. Hyora is washable. For small marks, mix one cup of water with a quarter teaspoon of clear detergent, spray lightly and blot with a clean, undyed cloth until the mark lifts, then rinse with clean water and let it air-dry. Cushion covers open and come off for washing: wash them gently in cool water and let them dry naturally. Never rub hard or use a hard-bristle brush, which can damage the fibres.


Indoor Sintered Stone
4 finishes. Every one held as a physical sample at the flagship.
Sintered stone is natural mineral, pressed and fired at high temperature into a dense slab that is close to non-porous. It carries the look of marble and travertine in a surface made for daily use: it resists scratches, stains, water and fading, and needs only gentle cleaning. Our tables take 9 mm lustrous slabs, and the veining runs differently on every one.
Sintered Stone Travertine Beige Lustrous 9mm
C8
The soft, banded beige of travertine in a lustrous 9 mm sintered stone slab, without the pits and pores of the natural stone. Warm and soft, it sits well with natural and golden teak.
- Mould resistance
- Anti-fungal
- Maintenance
- Wipe with a damp cloth, then dry
- Water resistance
- Yes
- Hygiene
- Resists mould and fungi
Care
Veining, mineral flecks and joint lines are part of sintered stone's character and never affect its quality or performance. Clean the surface daily with a granite cleaner, and polish it weekly. Avoid ammonia-based cleaners, scouring creams, abrasive cleansers and acid-based products: they can break down the sealant and discolour the stone. Never use metal sponges or abrasive pads, which can change the lustre of the surface. Wipe up spills straight away with a soft, dry, undyed cloth to prevent rings and marks. Use coasters, felt pads and non-plastic mats to protect the surface from scratches. For extra protection, renew the surface from time to time with a limestone cleaning gel.


Leather
3 finishes. Every one held as a physical sample at the flagship.
Aniline Plus is leather dyed through with aniline, so the natural grain stays visible, then given a light protective finish. It is soft from the first sitting and softens further with use, while the finish gives some protection against spills and makes everyday care easier. Small marks, creases and shifts of tone are the signature of a natural hide.
Cream Leather
L3
Aniline Plus leather in a soft cream. The natural grain stays visible under a light protective finish, and the hide grows softer with use. It works as a neutral or as an accent.
- Hand feel
- Soft and supple
- Leather type
- Aniline Plus
Care
Keep the leather dry and away from prolonged contact with sweat. Dust regularly with a soft duster, a dry non-abrasive cloth or a vacuum brush. Blot spills and grease straight away with an absorbent cloth or paper towel. Work in gentle circles from the outside of the mark towards the centre, dab rather than rub, and dry at once. Never use a leather cleaning solution on aniline leather: it wears away the protective finish. Keep water and other liquids out of the regular routine. Never use soap, toothpaste, perfume, nail polish, make-up remover, ointments or lotions, or any chemical, oil, detergent, bleach, alcohol or solvent: they dry the leather, strip its protective finish and can cause peeling, cracking and discolouration. Keep the sofa at least 50 cm from heaters and other heat sources, and out of direct sunlight and strong light, to protect its colour. Take care with strongly dyed clothing such as dark denim, and with buckles, zips, keys and toys, which can mark the surface. Condition the leather every 3 to 6 months with a leather protection cream made for aniline finishes; professional-grade leather care products are recommended.


Metal
3 finishes. Every one held as a physical sample at the flagship.
Metal draws the fine lines of the collection: bases, frames and details. A brass finish over hand-forged metal brings a warm, soft glow and sits easily beside teak, stone and leather; stainless steel, in a fine hairline brush or the Asteroid finish, gives a cooler, more restrained line.
Brass
MC1
A brass finish over hand-forged metal, brushed to a warm, soft glow. It lifts bases and details and sits easily beside teak, stone and leather.
- Maintenance
- Wipe with a soft, dry cloth
- Water resistance
- Yes
- Dimensional stability
- Stable through changes in temperature
Care
Wipe spills straight away with a dry, soft cloth. For dust and marks, clean with a mild all-purpose cleaner on a sponge or soft cloth, then dry with a soft towel. Never use abrasive cleaners or sharp objects; the finish needs only gentle care. Where a piece stands outdoors, cover it or bring it in during extreme heat or cold.


Powder Coated Aluminium
5 finishes. Every one held as a physical sample at the flagship.
Olive Green Aluminium
F23
- Maintenance
- Rinse with water and wipe dry
- Water resistance
- Yes
- Finish
- Powder coated
Care
Made for the outdoors, the frame still benefits from regular care. Wipe spills straight away with a dry, soft cloth. For dirt and debris, clean with a mild all-purpose cleaner on a sponge or soft cloth, then dry thoroughly with a soft towel to prevent water spots. Near the coast, rinse the frame with fresh water now and then to remove salt. Cover the furniture or bring it indoors during extreme heat or cold, and when it is not in use. Never use abrasive cleaners or sharp objects on the powder coat.


Indoor Suar Wood
2 finishes. Every one held as a physical sample at the flagship.
Suar is a tropical hardwood with a broad, expressive grain and a wide range of tone, from deep brown to warm caramel. Knots, fine checks and shifts of colour belong to the wood and are never a fault, so no two tops are alike. Finished in walnut or black, it gives a dining room weight and warmth.
Walnut Suar
HS02
Suar finished in a warm walnut tone, so the wide, swirling grain reads clearly. Rich without being dark, it brings warmth to a dining room.
- Durability
- Resists decay and termites
Care
Clean the wood with a mild cleanser and a soft, undyed cloth as needed, and wipe up spills straight away. Never use abrasives or harsh chemicals containing ammonia or silicone: they can damage the surface and the finish. For stubborn marks, use a soft-bristle brush and warm soapy water, then rinse off any soap with clean water and dry thoroughly with a soft cloth. Use coasters, felt pads and non-plastic mats against water marks, heat and scratches, and never leave water standing on the wood. Keep suar away from air-conditioning vents and damp places, and out of direct sunlight, which fades the colour over time. Where needed, protect the colour with wax or oil: sand lightly, apply an even coat with a lint-free cloth, leave it overnight and buff with a soft cloth. Repeat once a year.

Rope
3 finishes. Every one held as a physical sample at the flagship.
Polypropylene (PP) yarn rope, woven into seat panels, armrest wraps and backrests. It is light, strong and flexible, keeps its colour, resists stains and mildew, and needs only an occasional wipe, indoors or out.
Round Rope MKR29
MKR29
Round polypropylene rope in grey, woven into seats, backs and arm wraps. It is light, strong and flexible, keeps its colour in the sun, resists stains and mildew, and dries quickly.
- Material
- 100% polypropylene
- Water resistance
- Yes
Care
Lift loose dirt with a soft brush, a microfibre cloth or a handheld vacuum. Wipe spills straight away with a damp cloth and mild soap; no harsh chemicals are needed. For stubborn grime, scrub gently with a soft-bristle brush and soapy water, then rinse and let it air-dry. The rope does not absorb water, but shaking off the excess helps prevent mildew. When not in use, keep it under a breathable cover or in a dry, sheltered place.

Find Your Fabric
From everyday weaves to the cloth a room is built around, the fabric library runs 16 finishes deep.



See It in Your Own Light
Order swatches to judge the true colour, texture and finish at home, or review the whole library with a designer at the Glenmarie flagship.